|
|
pH & ORP Sensor Moisture cap
pH & ORP Sensor Moisture cap GE23/3PP
In order to maximise a pH or ORP sensors life, its essential that the electrode does not dry out. By using the moisture cap in conjunction with the immersion assembley the electrode will be maintained in a wet state even when the process liquid level falls below the sensor datum point maximising sesnor life.
Technical data
material: PP
Order information
NSH (35330103K) moisture cap for immersion assemblies GE 23/3 and GE 251 PP |
|
|
|
pH KCl Reservoir Vessel Set
pH & ORP KCl Reservoir Vessel Set - GE23/3
Vessel-set KCl liquid-filled pH or ORP sensors. The installation is possible on wall or in the immersion
Ca. 50 ml capacity. Inclusive 20 mm ASC-clamp for mounting. 2 m PVC hose
Order information
GE23/3 36510063K KCL reservoir vessel set
Accessories
VA-Pole for KCl-Bowl For installation of KCl vessel in flow assembly GE 23/3
|
|
|
|
pH Buffer Solutions For calibration of pH sensors
pH Buffer Solutions For calibration of pH sensors
The slope of pH sensors changes over the time (depending on the measuring media). We recomment a regular calibration with our buffer solutions. We offer 1000 ml packages of pH 2, pH 3.56, pH 4, pH 7, and pH 9.22, and 50 ml packages of pH 4, and pH 7.
Order information 50 ml
pH 4 - cal (95212010K) 50 ml buffer solution pH 4
pH 7 - cal (95212009K) 50 ml buffer solution pH 7
Order information 1000 ml
pH 2 - cal (95212000K) 1000 ml buffer solution pH 2
pH 3.56 - cal (95212003K) 1000 ml buffer solution pH 3.56
pH 4 - cal (95212007K) 1000 ml buffer solution pH 4
pH 7 - cal (95212001K) 1000 ml buffer solution pH 7
pH 9.22 - cal (95212004K) 1000 ml buffer solution pH 9.22 |
|
|
|
pH Sensor Impedance converter IWA 11.4 up to 1000m pH Cable
IWA 11.4 (47890101K) pH impedance converter
Impedance converter - for longer distances between electrode and measuring instrument or under unfavourable installation conditions. Boost and transmit pH signal up to 1000m. converts the high-impedance signal into a less sensitive low-impedance signal. Connection between IWA and measuring instrument is possible with standard cable (up to 1000 m length).
Applications
Waste Water Treatment, Process Water, Drinking Water / Beverages and Food Industry
Technical data
input characteristics: input resistor 10^12 Ohm
output characteristics: output resistor 1 kOhm
power supply: voltage supply +/- 5 .. 15 V
ambient conditions: ambient temperature max. 50°C
IWA 11.4 (47890101K) impedance converter |
|
|
|
MW/MD GE 23/3 PP Angle Bracket
MW/MD GE23/3PP Angle Bracket
Angle braket for easy installation of the immersion assembly GE 23/3
Technical data
mechanical construction - material Stainless steel coated with resin
Order information
MW/MD (35330200K) angle braket for the immersion assembly GE 23/3 PP |
|
|
|
pH Sensor Low Noise Signal Cable - TRIAX-D-1-X Connecting cable
pH Sensor Low Noise Signal Cable - TRIAX-D-1-X Connecting cable
Dual screened cable for connecting pH sensors, available in 3 and 5 m.
Low-noise, Dual screened, Electrode connector, Integrated semiconductor layer for antistatic protection
Technical data
measuring parameter: pH-value 0 .. 14 pH
ambient conditions: ambient temperature -20 .. + 70°C
material: PVC
Order information
TRIAX-D-1-3 (44136120K) 3m double screened connection cable for pH sensors.
TRIAX-D-1-5 (44136125K) 5m double screened connection cable for pH sensors. |
|
|
|
|
|
pH Sensor Signal Cable - COAX-D-2-1,5 BNC Connecting cable
pH Sensor Signal Cable - COAX-D-2-1,5 BNC Connecting cable
Coaxial cable with sensor and BNC plug, length 1,5 m
Technical data
ambient conditions: ambient temperature -20 .. +70°C
material: PVC
|
|
|
|
pH & ORP Low Noise Sensor Signal Cable - COAX-D-AE-X Connecting cable
pH & ORP Low Noise Sensor Signal Cable - COAX-D-AE-X Connecting cable
Single screened cable for connecting pH- and ORP sensors, available in 3m, 5m and 10m.
Low-noise, Singled screened, Electrode connector, Wire end ferrules, Integrated semiconductor layer for antistatic protection.
Technical data
measuring parameter: pH-value 0 .. 14 pH
ambient conditions: ambient temperature -20 .. + 70°C
material: PVC
Order information
COAX-D-AE-3 (44136007K) 3m connection cable for pH and ORP sensors.
COAX-D-AE-5 (44136009K) 5m connection cable for pH and ORP sensors.
COAX-D-AE-10 (44136011K) 10m connection cable for pH and ORP sensors. |
|
|
|
|
|