You are here:   Products > Control > Input Modules
Register   |  Login

Contact Details: +353 87 2768099 | +353 45 831575 | info@wpa.ie

Minimize

SM1 - 2 Channels Analogue Input Module

The SM1 - 2 channels analogue input module is designed to convert standard signals, resistance or temperature signals into numerical data accessible through the RS-485 or RS-232 port by means of the MODBUS protocol.

Measurement is carried out independently on 2 channels. Programming the modules is possible using RS-485 or RS-232 interface and LPConfig software.

The SM1 module incorporates the following functions:
Mathematical operations on channels and between measuring channels, conversion of measured or calculated quantities on the base of individual linear characteristics, min max storage values for each channel, programming of the measurement averaging time, servicing of RS-485 and RS-232 interfaces in MODBUS protocol, both in ASCII and RTU mode.

Dimensions: 22.5 x 120 x 100mm
2 channels analogue input module
Data Sheet
  
Manual

SM2 - 4 Channels Analogue Inputs Module

SM2 - 4 channel  analogue input module designed to convert standard signals, resistance or temperature signals into numerical data accessible through the RS-485 or RS-232 port by means of the MODBUS protocol. Measurement is carried out independently on 4 channels.
Programming of the modules is possible using RS-485 or RS-232 interface and LPConfig software.


The SM2 modules incorporate the following functions:
Mathematical operations on channels and between measuring channels, conversion of measured or calculated quantities on the base of individual linear characteristics,
Min Max value storage for each channel, programming of the measurement averaging time, servicing of RS-485 and RS-232 interfaces in MODBUS protocol, both in ASCII and RTU mode.


External dimensions: 45 x 120 x 100mm
4 channel  analogue input modul
Data Sheet
  
Manual

SM3 - 2 Channel Logic or Pulse Input Module

The SM3 module is designed to collect logic states or to count pulses coming from its inputs and make them available to computerized systems working on the base of an RS-485 interface. The SM3 module has 2 logic or pulse inputs and RS-485 interface with MODBUS RTU and ASCII transmission protocols. Programming of the module is possible using RS-485 or RS-232 interface and LPConfig software.

Module parameters: 2 logic or pulse inputs, RS-485 communication interface with MODBUS RTU and ASCII transmission protocols to operate within a computer network,
configurable baudrate 2400, 4800, 9600, 19200, 38400, 57600, 115200 bits/s, programming interface on the frontal plate of RJ type (RS232).


External dimensions: 22.5 x 120 x 100mm


2-channels module of logic or pulse inputs - SM3
Data Sheet
Manual

SM5 - 8 Channels Logic Input Module

The SM5 logic input module is designed to collect logic states of inputs and make them available to computerized systems working on the base of RS-485 interface. The SM5 module has 8 logic inputs and RS-485 interface with MODBUS RTU and ASCII transmission protocols. Programming of the modules is possible using RS-485 or RS-232 interface and LPConfig software.

Module parameters: 8 logic inputs, RS-485 communication interface with MODBUS RTU and ASCII transmission protocols to operate in computerized systems, configurable baud rate 2400, 4800, 9600, 19200, 38400, 57600, 115200 bits/s, programming interface on the frontal plate of RJ type (RS232).

External dimensions:  45 x 120 x 100mm
8-channels module of logic inputs - SM5
Data Sheet
  
Manual