|
|
Pressure Transmitter - Smart model APC-2000 ALW | Pressure Sensor | Transducer | HART
Model: Smart pressure Sensor transmmitter APC-2000 ALW
Measuring range: min. 0 ... 1 mbar; max. 0... 400 bar
Output signal: 4...20 mA, 0...20 mA or 0...5 mA + protocol HART; Profibus PA
Accuracy: 0,075%
Process connection: M20 x 1,5; G 1/2"; G 1/2"
(flush diaphragm); G 1" (flush diaphragm); M30 x 2 (flush diaphragm);
M20 x 1,5 (flush diaphragm); Diaphragm seals.
Options: Digital PROFIBUS PA signal
4…20 mA, 0…20 mA or 0…5 mA output signal + HART protocol
Programmable range, zero shift, characteristic and damping ratio
local Programming panel keys
ATEX Intrinsic safety
ATEX Explosion – proof
SIL 2 certificate
Marine certificate - DNV
PED Conformity (97/23/EC)
Accuracy 0.075%
Rangeability 100:1
|
|
|
|
|
Data Sheet
|
Manual
|
Smart Pressure Transmitter Sensor model APCE-2000PD and APCE-2000PZ | Absolute | Gauge | HART
Model: Smart pressure sensor transmitter model APCE-2000PD and APCE-2000PZ
Measuring range: min. 0 ... 1 mbar; max. 0... 400 bar
Output signal: 4...20 mA + protocol HART
Accuracy: 0,1% (0,075%)
Process connection: M20 x 1,5; G 1/2"; G 1/2" (flush diaphragm); G 1" (flush diaphragm);
M30 x 2 (flush diaphragm); M20 x 1,5 (flush diaphragm);
Diaphragm seals.
ATEX Intrinsic Safety
Rangeability 100:1
|
|
|
|
|
Data Sheet
|
Manual
|
Pressure transmitter model PCE-28
Model: PCE-28 Pressure Sensor Transmitter Transducer
Measuring range: min. 0 ... 10 mbar; max. 0... 1000 bar
Output signal: 4 ÷ 20 mA two-wire or 0 ÷ 10 V output
Accuracy: 0,2% (0,16%)
Process connection: M20 x 1,5; G 1"; G 1/2" (flush diaphragm);
G 1" (flush diaphragm); M30 x 2 (flush diaphragm);
M20 x 1,5 (flush diaphragm);Diaphragm seals;
Any range from 0...10 mbar up to 0...1000 bar
ATEX Intrinsic safety ( Gas, Dust) and IECEx certificate
Low-voltage version with ATEX certificate
Marine certificate DNV
Communication protocol Modbus RTU
|
|
|
|
|
Data Sheet
|
Manual
|
Pressure transmitter model AS
Model: Pressure transmitter model AS
Measuring range: 0 ÷ 1, 0 ÷ 2.5, 0 ÷ 6, 0 ÷ 10, 0 ÷ 16, 0 ÷ 25 Bar
Output signal: 4 ÷ 20 mA or 0 ÷ 10 V
Accuracy: 0,4%
Process connection: M20 x1,5; G 1/2"; R 1/2"
|
|
|
|
|
Data Sheet
|
Manual
|
Pressure Gauge model MS-100K (also with diaphragm seal)
Model: Pressure Gauge MS-100K
Measuring range: min. 0 ... 1 bar; max. 0... 400 bar
Casing diameter: 100 mm
Accuracy: 1%
Process connection: M20 x1,5
Options: Diaphragm seal
Casing diameter 100mm
Wetted Parts – stainless steel
Accuracy 1%
|
|
|
|
|
Data Sheet
|
Manual
|
|
|