P11P - Analog measuring transducer is designed for conversion into a standard analog signal active power in 1-phase network. Output signal is galvanically isolated from the input signal and supply.

Input: 1 A (X/1 A), 5 A (X/5A), 57,7...690 V, X/100V

Output: ± 0...4/20 mA, ± 0...10V

Mounting : DIN Rail

External dimensions: 45 x 120 x 100mm

 

 Manual

P13P - Analog measuring transducer is designed for conversion into a standard analog signal active power in 3-phase 3-wire network. Output signal is galvanically isolated from input signal and supply.

input: 1 A (X/1 A), 5 A (X/5A), 57,7...690 V, X/100 V

Output:± 0/4...20mA, ±0...10V

Mounting: DIN rail

External dimensions: 45 x 120 x 100mm

 Manual

 Manual

Power network parameter transducer P10 and P10A type are designed to measure:

power network parameters in 3-phase 3-wire or 3-phase 4-wire, balanced or unbalanced network systems e.g.: rms a.c. voltage and a.c. current, active, reactive and apparent power, active, reactive and apparent energy, different power factors, frequency, average active power (e.g. 15 min), cosj, tgj,

harmonics, up to 25-th,THD factor.

Transducer enables monitoring of the maximal power, measurement of max. and min. values with a time marker.

Transducer is commonly used in computer systems, e.g. with LUMEL-ENERGY program.

Input: programmable

100 V, 400 V,1 A, 5 A a.c.,

3 inputs to control energy counter tariffs,

Output:

P10 type - 4 relay outputs, 4 analog outputs 0...20mA, 4...20mA

P10A type - 4 relay outputs, 4 analog outputs +/-5mA and on request +/-20mA,

digital output RS485 - with MODBUS protocol,

1 or 3 pulse passive output,

Supply: 85...253 V d.c. or a.c 40...400Hz,

Display field: LCD 2 x 16 signs.

External dimensions: 152 x 73 x 118mm

Manual